Communication Card JET-P5002

Communication Card JET-P5002

¥150.00

This is an 8-channel I2C communication card designed for PMBUS protocol. It communicates with the host system via an RS485 interface at 38400bps and controls 8 independent I2C channels for data exchange with PMBus-enabled devices, remote data reading and conversion. Dimensions: 100×65×20mm.

Mechanical Dimensions(mm)	10165cm15(max)
Delivery Time	To Be Negotiated

Product Model

JET-P5002

Clear

Description

Product Features

Performance Specification

JET-BD8003 is an 8-channel I2C communication card for PMBUS protocol. It communicates with the host computer via RS485, controls I2C communication of 8 channels, and realizes data communication with products with PMBus function;
Equipped with RS485 interface, supports remote data reading and conversion;
Adopts standard RS485 interface with a baud rate of 38400bps.

Technical Specifications

Power Supply

Power Supply Parameters — Voltage (V)	5
Power Supply Parameters — Current (A)	0.1

RS485 Communication

485 Parameters — Baud Rate (bps)	38400
485 Parameters — Data Length (bit)	8
485 Parameters — Stop Bit (bit)	1
485 Parameters — Parity Bit	None

8-channel I2C

8-channel I2C — Frequency (K)	<100
8-channel I2C — Level (V)	3.3

Dimensions

Dimensions：Length×Width×Height: 100×65×20 mm

Port Definition and Pinout

A Channel 1 I2C Communication	Pin 1: SDA data line Pin 2: SCL clock line Pin 3: NC Pin 4: GND
B Channel 2 I2C Communication	Pin 1: SDA data line Pin 2: SCL clock line Pin 3: NC Pin 4: GND
C Channel 3 I2C Communication	Pin 1: SDA data line Pin 2: SCL clock line Pin 3: NC Pin 4: GND
D Channel 4 I2C Communication	Pin 1: SDA data line Pin 2: SCL clock line Pin 3: NC Pin 4: GND
E Channel 5 I2C Communication	Pin 1: SDA data line Pin 2: SCL clock line Pin 3: NC Pin 4: GND
F Channel 6 I2C Communication	Pin 1: SDA data line Pin 2: SCL clock line Pin 3: NC Pin 4: GND
G Channel 7 I2C Communication	Pin 1: SDA data line Pin 2: SCL clock line Pin 3: NC Pin 4: GND
H Channel 8 I2C Communication	Pin 1: SDA data line Pin 2: SCL clock line Pin 3: NC Pin 4: GND
I Channel 1 RS485 Communication	Pin 3、4: A: RS485 positive signal Pin 2、5: B: RS485 negative signal Pin 1、6: GND
J Channel 2 RS485 Communication	Pin 3、4: A: RS485 positive signal Pin 2、5: B: RS485 negative signal Pin 1、6: GND
K Chip Power Supply	Pin 1、2: -5V power supply Pin 3、4: +5V power supply
L Chip Power Supply	Pin 1、2: -5V power supply Pin 3、4: +5V power supply