APPLICATIONS / AUTOMOTIVE ELECTRONICS

Automotive Electronics Test & Burn-in Systems

Dedicated production equipment for motor drivers, on-board chargers, domain controllers and PTC heaters.

JETTEST Automatic Motor Driver Burn-in Line

Automatic Motor Driver Burn-in Line

Choose Equipment for Your Production Stage

Different automotive components require different electrical connections, thermal conditions and handling methods. JETTEST provides product-specific test and burn-in equipment, with the functions shown below tied to the corresponding system.

Motor drivers

Review the motor-driver line for monitored burn-in, coolant handling and production-data collection.

Automatic Motor Driver Burn-in Line →

Domain controllers

Review the DCU line for automated loading, chamber burn-in, current monitoring and output checks.

Automatic Domain Controller Burn-in Line →

On-board chargers

Review the OBC system for charger-module burn-in with monitored electrical and temperature conditions.

OBC Power Burn-in System →

PTC heaters

Review the PTC line for the documented water-circulation testing and burn-in process.

Automatic PTC Heater Test & Burn-in Line →

Testing & Production Capabilities

Motor-driver monitoring

The motor-driver line monitors output voltage, current, power, temperature and communication. Its process includes product identification, electrical docking, coolant connections and handling around burn-in.

Domain-controller burn-in

Each chamber has its own temperature control, heating and ventilation. PC/PLC monitoring and MES process tracking support the documented DCU workflow.

PTC process checks

The water-circulation PTC line includes leak testing, insulation and withstand testing, burn-in with drainage, resistance testing and appearance inspection. These functions belong to the PTC configuration.

Domain Controller Burn-in Workflow

A product-specific process from robot loading to unloading, with a separate return path for fixtures.

  1. 01   →

    Load & identify

    Robot loading, connector mating and barcode scanning; transfer to the waiting position.

  2. 02   →

    Automatic burn-in

    Chamber temperature control with communication, output, current and load checks.

  3. 03   →

    Air cooling

    Transfer to the documented air-cooling station after burn-in.

  4. 04

    Unload & separate

    Robot disconnects and unloads the unit; NG products are rejected.

↩ Fixture return: Elevator returns fixtures to the loading end.   NG path: Nonconforming products leave the flow at unloading.

Reference: Automatic Domain Controller Burn-in Line. Other automotive equipment has its own process configuration.

JETTEST Automatic Motor Driver Burn-in Line

Automatic Motor Driver Burn-in Line

Burn-in equipment for electric vehicle motor drivers.

Output voltage, current, power, temperature and communication monitoring; test data upload to the customer MES.

JETTEST Automatic Domain Controller Burn-in Line

Automatic Domain Controller Burn-in Line

Automated burn-in for vehicle domain control units.

Independent chamber temperature control, communication and output testing, current monitoring and load testing.

JETTEST OBC Power Burn-in System

OBC Power Burn-in System

Burn-in equipment for on-board charger power modules.

PC and PLC monitoring, adjustable voltage, current and temperature, and MES process tracking.

JETTEST Automatic PTC Heater Test & Burn-in Line

Automatic PTC Heater Test & Burn-in Line

Testing and burn-in equipment for automotive PTC heaters.

The water-circulation line includes leak testing, insulation/withstand testing, burn-in, resistance testing and inspection.

Equipment functions, test conditions and handling arrangements are defined for the selected product and project configuration.

Define Your Equipment Configuration

Prepare the following information for a focused discussion with JETTEST.

  • Component type, electrical ratings and connection drawings
  • Required checks, limits and burn-in duration
  • Cooling or coolant requirements where applicable
  • Production target, handling method and MES data requirements

Automotive Electronics Questions

Are all automotive components processed on the same line?

The portfolio lists separate equipment for motor drivers, OBC modules, domain controllers and PTC heaters. Their connections, loading arrangements and test processes differ.

Which systems support production traceability?

The motor-driver handbook specifies test-data upload to the customer MES. The domain-controller and OBC systems describe MES process tracking. Confirm the required interface and data fields for the chosen equipment.

What does the domain-controller system monitor?

The documented items are communication, output, current monitoring and load testing. Voltage, current and temperature settings are configurable for the specified product.

Discuss Your Automotive Electronics Production Requirements

Share your product specifications, required process and production target so JETTEST can review the appropriate equipment configuration.

Corporate Foundation
Proof of Capability
Global Ecosystem
OUR SERVICE
Corporate Dynamics
Industry Perspective
Knowledge Hub
Social Responsibility

Consumer Electronics

Consumer Electronics

Power, Energy & Batteries

Power Supplies

New Energy

Battery

Electronic Components

Electronic Components