APPLICATIONS / CONSUMER ELECTRONICS

Consumer Electronics Testing & Automation

PCBA test systems, charger burn-in equipment and integrated test lines for power adapters and electronic power products.

JETTEST Fully Automatic Test and Burn-in Line

Fully Automatic Test and Burn-in Line

Choose Equipment for Your Production Stage

Select equipment around the product and the production stage: board testing, finished-product burn-in or a connected test line. JETTEST offers dedicated equipment for each of these requirements.

Power supply PCBAs

Check boards using automated ICT and FCT stations. Fixture compatibility and station arrangement are defined around the PCBA.

PCBA ICT/FCT Test System →

Chargers & adapters

Use a dedicated cabinet when the production requirement is batch burn-in of charger or adapter products.

Charger Energy-Saving Burn-in System →

Finished power products

Connect barcode identification, electrical tests, burn-in and sorting in one production workflow.

Fully Automatic Test and Burn-in Line →

Testing & Production Capabilities

PCBA testing

The PCBA system combines ICT and FCT. The handbook lists functional test items such as startup time, inrush current, output ripple, dynamic load and efficiency. The selected instruments and test program determine the implemented items.

Power-up & hi-pot testing

The automatic test and burn-in line includes no-load/full-load power-up checks and a separate high-voltage withstand test stage.

Burn-in & sorting

Products pass through the configured burn-in process before final testing and sorting. The line identifies different failure categories, including startup, burn-in, hi-pot and final-test failures.

Power Supply Test & Burn-in Workflow

  1. 01   →

    Load & identify

    Manual or automatic loading, fixture preparation and barcode scanning.

  2. 02   →

    Power-up test

    Check no-load and full-load output before the burn-in stage.

  3. 03   →

    Burn-in

    Operate products under the configured load, temperature and duration.

  4. 04

    Final tests & sorting

    Hi-pot and final testing, followed by disconnection, sorting and unloading.

Return path: Fixture decoding and board return.   Sorting: Failed products are classified by the relevant test or identification result.

Reference: Fully Automatic Test and Burn-in Line. PCBA testing is provided by a separate equipment option.

JETTEST PCBA ICT/FCT Test System

PCBA ICT/FCT Test System

Automated in-circuit and functional testing for PCBA production.

Dual or multiple test stations; fixtures selected for the board and test requirements.

JETTEST Charger Energy-Saving Burn-in System

Charger Energy-Saving Burn-in System

Batch burn-in for chargers and power adapters.

The listed configuration has 120 slots and a rated burn-in power of 180 W per slot.

JETTEST Fully Automatic Test and Burn-in Line

Fully Automatic Test and Burn-in Line

A connected test and burn-in workflow for power supplies and adapters.

Barcode scanning, power-up testing, burn-in, hi-pot testing, final testing and product sorting.

Equipment functions, test conditions and handling arrangements are defined for the selected product and project configuration.

Define Your Equipment Configuration

Prepare the following information for a focused discussion with JETTEST.

  • Product type, dimensions and connector arrangement
  • Board test points or finished-product test specification
  • Burn-in conditions and target production output
  • Existing equipment, available floor space and loading method

Consumer Electronics Questions

Which equipment is suitable for PCBA testing?

The PCBA ICT/FCT Test System provides automated board testing with dual or multiple stations and support for different fixtures. Share the board dimensions, test points and functional test specification.

Can I select a burn-in cabinet without a complete line?

Yes. The charger burn-in system is listed separately from the integrated test and burn-in line. Choose according to whether you need a batch burn-in station or a connected production workflow.

Which functional test items are available?

The PCBA system handbook lists items including startup time, inrush current, ripple, dynamic load and efficiency. The actual configuration must be matched to the product, instruments and approved test sequence.

Discuss Your Consumer Electronics Production Requirements

Share your product specifications, required process and production target so JETTEST can review the appropriate equipment configuration.

Corporate Foundation
Proof of Capability
Global Ecosystem
OUR SERVICE
Corporate Dynamics
Industry Perspective
Knowledge Hub
Social Responsibility

Consumer Electronics

Consumer Electronics

Power, Energy & Batteries

Power Supplies

New Energy

Battery

Electronic Components

Electronic Components